Easy Way Wholesale
 

Solvent Born, Bonding Primer Sealer, VOC: less than 650 g/l

Description:

 

400 Clear is an ultra-premium solvent based bprimer/sealer/bonder developed to solve many painting problems. It provides excellent adhesion, sealing and bonding on many hard to-coat surfaces. Most clean and dull paintable surfaces may not need sanding, but sanding or dulling the surface is required on hard, glossy surfaces for maximum adhesion. XIM 400 Clear can be used as an alkyd paint fortifier to improve the alkyd's adhesion anddurability.

Applications:

Wood, Plywood, Hardboard, Rattan, Wicker, Wallboard, MOD Board, PVC Plastic, Fiberglass, Glass, Tile, Porcelain, Iron, Steel, Tin, Aluminum, Copper , Brass, Magnesium

Features & Benefits:

  • Properties of both a primer and an adhesive
  • Dries Clear
  • Helps Inhibit Rust
  • Seals and Protects
  • Helps Prevent Flaking, Blistering, Peeling
  • Makes paint stick to tough-to-paint surfaces, including ceramic tile, porcelain, glass, Formica and melamine laminates, PVC, fiberglass, many plastics, aluminum, many metals, wood
  • Very fast drying
  • Tintable to pastel colors with universal tint colors
  • Interior / Exterior applications
  • Top coat with oil-alkyds and latexes in 30-60 minutes

Product Use:

400 Clear is an ideal prime coat for Wood, Ferrous metals and Non-ferrous metals, Plaster, Formica, Some Plastics, Glass, Tile, Fiberglass and Hardboard. Because there are many types of surfaces, plastics and composite materials, always test a small area first for adhesion and topcoat compatibility. 400 Clear is not recommended for tubs, sinks or showers where continuous water contact occurs. If extra corrosion protection is needed when coating iron or steel, XIM 360 Rust Inhibiting Bonding Metal Primer is recommended. On extremely porous surfaces, very rough or severe staining types of wood a second coat of XIM 400 Clear may be needed prior to application of the finish coat(s). 400 Clear can be used for both indoor and outdoor applications and is recommended for use with oil/alkyd topcoats. If you are planning to use a latex topcoat use XIM 400 White or completely dull or sand the 400 Clear's film for better adhesion by the latex. Some highly tinted/deep custom mixed topcoats can cause the 400 Clear to soften and lift. Always check a small area for compatibility before proceeding with the job. Not recommended for use with two component top coats or top coats that contain strong solvents such as lacquers. Not to be used where any alkalinity or high pH is present. Not recommended for use on polyethylene, Teflon, Kynar or Nylon. 400 Clear is not intended to be used as an exterior clear wood finish or as a topcoat clear finish

Available In:

472 ml aerosol 946 ml 3.78 ltr

 

 

Home | Products | Solutions | Shopping | Disclaimer | Company | Contact
© 2011 EasyWay. All rights reserved | Weboptimizers