Easy Way Wholesale
PEEL BOND
 

High-Build. Water-Based, Clear, VOC, Bonding Primer: less than 100 g/l

Fills & prepares cracked and weathered surfaces for latex topcoats: Apply to:

Wood, Weatherboards, Plywood, Stucco, Brick, Aluminum, Galvanized, Fiberglass and PVC Plastics.

Description:

XIM’s Peel Bond is a unique, high build, water-based, penetrating, bonding primer/sealer. It is formulated to bond-to and seal a wide range of construction materials. It can reduce the cracking and peeling or the top coat paint by remaining flexible over the life of the paint. It can help reduce the time spent on surface Preparation, however, it is not a complete substitute for all surface preparation and all surface conditions.

Applications:

For Priming Wood, T-111 Siding, Weatherboards, Plywood, Hardboard, Brick, Aluminum, Galvanized, Fiberglass, PVC Plastics and Previous Paint.

Features & Benefits:

  • Fast drying, penetrating, filling primer for exterior applications
  • Ideal for rough surfaces, T111 Siding, Plywood, Stucco, Brick,
  • Remains flexible
  • Low temp, high humidity application
  • High Build
  • Compatible with Latex Paints only
  • Top coat with exterior latex and elastomeric paints in 60 minutes
  • Cures at Humidity up to 90%
  • Cures at Temp. as low as 40F surface Temp
  • Tintable with water based tint colors
  • Eliminates Call Bakcs
  • Reduce Labor & Prep Time
  • Easy to Apply
  • Long Lasting Finish Coat
  • Used for Interior & Exterior
  • Cleans up with Water & Soap
  • Environmentally Friendly
  • Product Use:

    Peel Bond is an ideal prime coat for wood, plywood, hardboard and T1-11 siding, as well as other architectural construction materials including: stucco, brick, aluminum, galvanized metal, fiberglass, PVC plastic and PVC siding, and previously painted surfaces.

    Note:

    Peel Bond will not reattach loose or peeling paint, which must first be removed to a sound, stable surface. Peel Bond will not resolve underlying moisture problems inherent in or behind the substrate.

    Note:

    Peel Bond can help fill and level rough surfaces, however it is not intended as a replacement for wood fillers, caulk or drywall mud.

    How to Apply:

    1. Power wash and scrape. Feather sand peeled paint edges as needed for smoother top coat.

    2. Apply Peel Bond by brush, roller, pad or spray up to 30 mils wet in a single application.

    3. Peel Bond dries hazy clear telling you its ready to paint or it can be tinted for a guide coat.

    4. Apply to latex topcoat for a beautiful and long lasting results. Peel Bond is a better way to paint!

    Available In:

    946 ml 3.79 ltr 18.93 ltr
 

Home | Products | Solutions | Shopping | Disclaimer | Company | Contact
© 2011 EasyWay. All rights reserved | Weboptimizers