Easy Way Wholesale
Multi-Purpose House Wash
 

No Bleach or Ammonia

  • Removes tough stains from dirt, mold, algae, mildew & more!
  • A major breakthrough in house wash technology.
  • The proprietary formulation contains "Sporex", a unique additive which removes tough stains from mildew, mold, algae, fungus and moss, and leaves the surface completely clean.
  • Special surfactants penetrate the surface to safely and easily dissolve the toughest stains from dirt, oil, grease, bird droppings, tree sap, and acid rain.
  • Removes gray weathering on wood, chalking, and oxidation.

Earth Friendly:

Water-Based . Biodegradable . Non-Flammable . Non-Toxic . Non-Abrasive

Recommended Uses:

A major breakthrough in house wash technology. The proprietary formulation of Krud Kutter House Wash contains “Sporex”, a unique additive which removes tough stains from mildew, mold, algae, Fungus and moss, and leaves the surface completely clean. In addition, special surfactants penetrate the surface to safely and easily dissolve the toughest stains from dirt, oil, grease, bird droppings, tree sap, and acid rain. Even removes gray weathering on wood, chalking, and oxidation.

SAFE, FAST AND EFFECTIVE ON: recommended for exterior siding (wood, vinyl, aluminum), roofing, gutters, wood fences and decks, stucco, brick and cement block, masonry, concrete driveways, walkways and walls, even patio furniture, and boats.

Directions for Use:

FOR BEST RESULTS USE ON A WET SURFACE:

When used in pump sprayer dilute 19:1 HOSE -END SPRAYER:

1. Attach garden hose to back of sprayer with valve in “OFF” position.

2. Turn on water to the hose. With valve in “RINSE” postion wet the surface to be cleaned.

3. With valve in “CLEAN” position, apply the cleaner to the surface from the top down.

4. Allow to work for 5-10 minutes. Do not allow to dry on surface.

5. Rinse off treated surface with valve in “RINSE” position. Turn hose on full pressure for best results. Rinse surrounding areas and vegetation with water.

6. On extremely soiled or mildewed surfaces, it may be necessary to scrub with a bristle brush, and a second application may be needed.

PRESSURE WASHER:

1. Rinse surrounding plants with water.

2. Wet surface to be cleaned.

3. Place detergent application siphon tube and screen filter directly into container. Open meter valve (if applicable) for maximum product flow. For reservoir machines, pour product (full strength) into pressure washer.

4. Spray at low pressure onto a wet surface.

5. On vertical surfaces, always spray from the top down.

6. Allow product to remain on the surface for 3 to 5 minutes to penetrate. Do not allow product to dry on surface.

7. Remove siphon tube from solution and rinse surface with high pressure spray thoroughly.

8. Flush siphon tube with clean water prior to storage.

Always test on an inconspicuous area first.

When using a pressure washer to clean painted surfaces, please be aware that water pressure alone may remove paint,or highlight existing discoloration caused by the sun’s UV.

Color: Clear

Available In:

946 ml 3.79 ltr
 

Home | Products | Solutions | Shopping | Disclaimer | Company | Contact
© 2011 EasyWay. All rights reserved | Weboptimizers